Frequently Asked Questions

  • Will I notice any vision differences between Kepler Kompakt and Kepler Advanced?
    No, the ExamVision Kepler systems have exceptional quality and design which gives you a very high operational clarity in both Kepler systems.
  • Why is Kepler Advanced more expensive than Kepler Kompakt?
    The system in Kepler Advanced is much more advanced than a one-magnification Kepler system, such as Kepler Kompakt. Kepler Advanced gives you more flexibility if you operate between different magnifications during the same operation.
  • What is the difference between a Kepler Kompakt and a Kepler Advanced?
    Kepler Advanced offers four magnifications. Kepler Kompakt in comparison offers one magnification, which can be powered up later to another magnification. Kepler Advanced is designed specifically for very experienced loupe users.
  • Why do I have to be experienced with loupes to use Kepler Advanced loupes?
    If you are performing a complicated operation you may often wish for higher magnification during the procedure, without needing to change loupes. As an experienced doctor/dentist/veterinarian your eye is trained to use and quickly adapt to high magnification. With Kepler Advanced’s Turn’N’Click system, you can easily switch magnifications in a single, swift motion.
  • What makes the Kepler Kompakt more expensive than the HD?
    The Kepler is a much more complex lens system than the Galilean HD. The Kepler Kompakt has prisms inside the ocular, so it is much more difficult to construct. Plus ExamVision makes it very short and light! That is why it is more expensive. The construction also makes the Kepler a little heavier (approx 25gm), but it is still well-balanced and lightweight compared to other prismatic loupes.
  • Will I see a difference between the image of a Kepler Kompakt and an HD loupe?
    When you compare the image between the two systems, you will notice an edge to edge sharpness in a Kepler system, which cannot quite be achieved in Galilean. This sharpness comes at the price of flexibility - the Kepler needs to be adjusted very precisely to give this sharpness, and you won't get the same freedom of movement as with a Galilean HD. We advise you to try both and see which you prefer for the work you do!
  • I have a working distance of 55 cm – does this influence my loupe choice?
    No it doesn’t influence your magnification. But it is important to note that it is only possible to achieve a really long working distance (over 62 cm) with a Kepler system in the higher magnifications (3.5+) - in a Galilean system it is physically impossible to make the working distance this long without losing a little magnification.
  • What does fine-focus mean?
    The Kepler Kompakt has a fine-focus feature, which means that you can manually adjust each ocular just a little if necessary to perfect the focus, then lock it in place. ExamVision will have already set your working distance to your specifications, but the fine-focus means that you can achieve a perfect image.
  • Which magnification is right for me?
    You will have to try various degrees of magnification to find out which is best suited to you, your sight and the work you do.

    If you are using magnification all day long, we recommend two to three times magnification, as these levels give you an optimal depth of field (i.e. freedom to move back and forth with your subject in focus). This helps you maintain a relaxed posture throughout the day. Field of view is also widest at these magnifications.

    Higher magnifications are best suited to specialist work, usually for a few hours at a time. Many of our customers have a 2.8 loupe for general work, and use them in combination with a 3.3x, 3.8x, 3.5x, 4.6x, 5.7x or 6.4x for intricate procedures.

  • I can see perfectly well. Why do I need loupes?
    If you can't see it, you can't treat it! Magnification allows you to see the small details better. You will be able to work with a greater degree of precision, making diagnosis and treatment safer, more reliable and faster. Your ergonomic position is also improved when you use magnification – you don’t have to lean in close, bending your back and neck to see the details.
  • Will my eyesight be weakened by using magnification at work?
    No. Your eyes will still get plenty of healthy exercise, but they won't be strained.
  • I am really short-sighted. Which loupes should I buy?
    Whichever style of ExamVision loupe you choose, we can fit your prescription into the loupe and into the outer lenses, so you can see both your work area and for example your computer screen in perfect focus. Your loupes will be custom-made – they will be perfect for you.
  • Which is better, flip-up or TTL?

    This is a question of personal preference. ExamVision believes that the best possible optical performance is achieved by bringing the loupe as close as possible to the eye, which means we would always recommend a TTL (through-the-lens) solution.

    We no longer make a flip-up model – instead we concentrate on making individually customized TTL loupes.

    Perhaps you are considering upgrading from your existing flip-up to a TTL? Ask yourself how often you actually flip the loupe out of the way during a day's work. If you don't currently use your flip-up function, then we would recommend the ExamVision HD TTL as your perfect upgrade.

  • Do all loupes use the same standard for measuring degree of magnification?
    No. It depends on the manufacturer and the loupe system. Unfortunately there is no generally accepted standard, so a 2.3 magnification in one brand may feel the same as a 2.5x magnification in another brand. ExamVision always measures the ‘angular magnification’ at a working distance of 40cm. Magnification is a good starting point, but you need to test a pair of loupes and consider the whole package before you make your purchase: clarity, comfort, width and depth of field.
  • Why are your loupes so expensive?
    ExamVision loupes and lights are designed and produced without compromise in Denmark. Each pair is custom-made to suit the customer's eyesight and working practices. We use only the highest quality materials, and features like Hi-Index glass come as standard. Our dealers in different countries are all individually trained in fitting ExamVision loupes, and many have opticians on the team to ensure a perfect service. This is why our loupes may cost a little more than the competition – but when you first try ExamVision you will see clearly that they are the best!
  • If my eyesight changes, how do I change my loupes?
    We offer to correct your loupes – both telescopes and prescription lenses – to suit your new prescription. If we order the new prescription lenses for you in advance, then you send in the loupes, we will make the correction in less than a working week before it is sent back via your local dealer. Your loupes will get a service at the same time!
  • I live in an area not covered by your distributors. Can I still buy your loupes?
    Drop us a line at, and we should be able to help.
  • I have been told I need to sit up straighter to avoid neck and back strain. How do loupes help me do that?
    Because you see a magnified image, you don't need to lean into your subject (your patient for example). This allows you to sit up straighter for long periods at work, relieving strain on the muscles in your back and neck. ExamVision loupes also have an excellent depth of field (circa 20cm), so you can move back and forth while keeping your subject in focus, which also helps to avoid stiffness.

    If you experience back and/or neck stiffness or pain at work, then it may be advisable for you to use our Prisma Lens System™, TM built into your loupes. The prism refracts the image, so you can sit up even straighter. Please discuss this in more detail with your local ExamVision dealer.

  • When is it important to use BlueLight Protection?
    Working in a high exposure LED environment with prolonged time in front of screens and LED lighting puts you at risk of eye strain and diseases such a cataracts and age-related macular degeneration. If you work in this type of environment it is recommended to have BlueLight Protection in your loupes.
    One or more factors can put you at risk:
    - Long working hours in a high exposure LED environment
    - Being over 45 years of age
    - Genetic disposition to AMD (Age-Related Macular Degeneration)*
    - Early signs of AMD (Age-Related Macular Degeneration)*


    Eye health relies on various factors (age, genetics, smoking, diet). Light is one of the modifiable risk factors on which an ophthalmic lens may act. UV is one contributing factor of cataracts. Blue-Violet light is one contributing factor of AMD.(1)


    McCarty CA, Taylor HR. A review of the epidemiologic evidence linking ultraviolet radiation and cataracts. Dev Ophthalmol. 2002; 35:21-31. Sunlight and the 10-year incidence of age-related maculopathy: The Beaver Dam Eye Study. Arch. Ophthalmol., 122, 750-757. New discoveries and therapies in retinal phototoxicity, Serge Picaud et Emilie Arnault, Points de Vue N°68, Spring 2013.)

  • What is the Eye Protect System?
    The Eye Protect System™ is a revolutionary protection against harmful UV and Blue-Violet light, developed by lens manufacturer Essilor, which ExamVision can incorporate in the loupe oculars. Essilor has found that Eye Protect System™ lenses are up to three times more protective against harmful Blue-Violet light than standard prescription lenses, based on in vitro photoprotection tests on retinal cells. The Eye Protect System™ lenses with the UV coating Crizal Forte® decreases light-induced retinal cell death by 25%.
    Eye Protect System by Essilor is used in the loupes oculars.
  • I have read that most harmful blue light protection gives a yellow tint. Is colour transmission a problem with the Eye Protect System™?
    No, your perception of colour will remain the same. Until now solutions that block harmful blue light have forced wearers to accept blue reflections and/or a yellow residual tint. Essilor presents a new approach with the Eye Protect System™ that gives you the protection you need in a perfectly clear lens, without any aesthetic disadvantages. Eye Protect System™ includes a new Smart Blue Filter that is embedded in the lens. This, paired together with Crizal Forte® coating, will give you prescription lenses that protect your eyes against harmful UV and blue light, ensuring that there are no blue reflections or a yellow residual tint.
  • Will the BlueLight Protection protect me when using my UV curing light or soft-tissue laser?
    No, For activities like blue-light curing of composites, or soft-tissue laser you will need to use an approved specialised filter to adequately protect your eyes.
  • I am very short-sighted, with an optical prescription of minus 11.0 diopter. Can ExamVision help me?
    ExamVision always use hi-index lenses, so we can make your carrier lenses as thin and light as possible. Your ExamVision dealer will recommend the best frame for your prescription, and of course we can also put your prescription in the ocular.
  • I have had problems using loupes before, because I have a squint – can you make a custom-made loupe that works for me?
    Yes we can. Your ExamVision dealer will discuss your eyesight with you. We can solve all op-tical challenges – our optometrists in Denmark are experienced in providing custom solutions.
  • I own a product that I dont see on the website. Has it been discontinued?
    ExamVision is constantly improving its range of products incorporate of improvements in materials and design.

    Therefore, a number of products have been discontinued, but ExamVision will of course continue to service and maintain these products for as long as possible.

    Discontinued products:

    Lite loupes: try the Essential instead

    HD 4.2 loupe: you could consider a HD 3.8 or a Kepler Kompakt 3.5 or 4.6

    HD 5.0 loupe: try the Kepler Kompakt range – up to 5.7 times magnification!

    Basic LED, Essential or Essential Upgrade LED: The Nano Essential LED might suit you

    Focus™ XP: Try the Focus™ Bright with the Xtend control unit. You should find it gives a much more even light spot.

    Fibre Optic Focus lights: These are excellent lights, and we will continue to service them. But if you are looking for a new light, consider one from the portable Focus LED range.